ADView2 Modular Blood Pressure, Temperature & SpO2 Monitor

MODULAR DIAGNOSTIC STATION BASE UNIT
It all begins with blood pressure. The ADView 2 easily captures automated blood pressure measurements at the touch of a button. Our non-invasive blood pressure module uses the oscillometric method, with both pulse rate and the mean arterial blood pressure (MAP*) displayed in about 30 seconds. With seven available cuff sizes, ranging from child to thigh, the ADView2 can be used for patients ages three and older. Adult Plus and Large Adult Plus cuffs come standard. Our ADView® 2 starts with a blood pressure base unit. From there, optional modules and accessories allow you to create a diagnostic solution perfectly suited to your needs.
Choose options at the time of purchase and we’ll ship your ADView  2 configured. Or add new modules as you need them to upgrade in the field.
Our connect-and-go construction makes expanding your ADView 2 effortless!
First Select the configuration you need.

With a manual mode option for added versatility.
Our original ADView was the first diagnostic station to offer a manual mode allowing you to capture blood pressure with your stethoscope using the traditional auscultatory method without changing cuffs. Manual mode provides important versatility for your patients with arrhythmias or other complex needs.

And a new, customizable averaging protocol.
With the ADView2, we also offer a user-definable averaging mode with programmable options including two to five readings, start and interval delays, and first-measurement exclusion. Averaging is recognized as a key component of accurate blood pressure measurement and was used in the recent SPRINT trial conducted by the National Institute of Health.
Pulse Oximetry Module Add a pulse oximetry module to your ADView2 to measure oxygen saturation of arterial blood flow in about 10 seconds. The ChipOx NellcorTM-compatible SpO2 module displays pulse-rate signal strength during measurement, and comes with a reusable finger clip sensor and 8-foot cable. An optional pediatric/multi-site sensor is also available. Alternatively, choose the Masimo SET® SpO2 module upgrade. Masimo “SET” means Signal Extraction Technology which is a patented pulse ox module that reads through motion. Very nice for children and elderly that have shaking limbs, etc.

OPTIONAL MODULES

Temperature Module
Add a Covidien FilacTM 3000 Thermometry module to your ADView2 for an oral or axillary temperature reading in as little as 3-6 seconds. The module features both Fahrenheit and Celsius scales, switchable with the touch of a button, a cold mode for lower ranges, and a built-in, color-coded storage well for the probe and box of 20 disposable probe covers (included). An optional color-coded rectal chamber/probe is also available.

Pulse Oximetry Module
Add a pulse oximetry module to your ADView2 to measure oxygen saturation of arterial blood flow in about 10 seconds. The ChipOx NellcorTM-compatible SpO2 module displays pulse-rate signal strength during measurement, and comes with a reusable finger clip sensor and 8-foot cable. An optional pediatric/multi-site sensor is also available. Alternatively, choose the Masimo SET® SpO2 module upgrade.

Warranties:

• 3- Year on Main Unit, SpO2 modules, Temp module.
• 2- Year Blood Pressure Cuffs.
• 2- Year Desktop Caddy, Wall Mount, Mobile Stand.
• 90- Day Accessories (SpO2 Sensors, temp probes, etc.)